AGILE Series
The Agile Series of inverters by Bonfiglioli sets new standards in technology for a broad range of users. Agile inverters are particularly suited for the food & beverage, textile, wood, packaging and ceramic industries, where they can be used in a variety of medium complexity automation processes.
key features
Series optionally extendable for field bus communication
Sensorless control of synchronous and asynchronous motors
Modbus and Systembus onboard
DC link connection
Integrated brake chopper
Power failure control
Programmable PI Controller
Integrated VPLC
Master/slave function with electronic gear
Integrated safe torque off STO (SIL 2/ PL d) function
Energy Saving function
Intelligent current limits
Output frequency 0...599 Hz, higher frequencies on request
Diagnosis and setup via integrated keypad and integrated Service interface for PC connection
Specifications
Degree of protection
IP20 (EN 60529)
Rated speed
0 ... 599 Hz
Certifications
UL508c
STO (EN13849 / EN 61508)
STO (EN13849 / EN 61508)
Conformity
CE
EN61800
EN61800
Specifications
Main options
• Different Field bus options like CANopen, PROFIBUS, Modbus
• Optional accessories like brake resistor, mains chokes, mains filters
• Optional Connection set for connection to PC
Optional field bus communication:
Optional interface for communication to PC
Optional PC software
Accessories:
• Optional accessories like brake resistor, mains chokes, mains filters
• Optional Connection set for connection to PC
Optional field bus communication:
- CM-CAN: CANopen
- CM-PDP-V1: PROFIBUS
- CM232: Modbus ASCII & Modbus RTU for point-to-point connection
- CM485: Modbus ASCII & Modbus RTU via RS485 connection
- CM-DeviceNet: DeviceNet
- CM-EtherCAT®: EtherCAT®
- CM-PROFINET: PROFINET
- CM-Ethernet/IP: Ethernet/IP with one usable port as end-of-line device
- CM-Ethernet/IP-2P: Ethernet/IP with two usable ports (daisy chaining is possible)
- CM-Modbus/TCP: Modbus/TCP with one usable port as end-of-line device
- CM-Modbus/TCP-2P: Modbus/TCP with two usable ports (daisy chaining is possible)
- Ethernet VABus/TCP: VABus/TCP: with one usable port as end-of-line device
- Ethernet VABus/TCP-2P: VABus/TCP: with two usable ports (daisy chaining is possible)
Optional interface for communication to PC
- ASK-USB: Communication to PC via optional communication cable
Optional PC software
- VPlus for Windows operating system with motor setup, terminal monitor
- Actual value window, scope function, parameter storage
Accessories:
- Brake resistors Type BR: The brake resistors offer an inexpensive solution to dissipate generator power that occurs at deceleration. A thermal sensor for the brake resistor protects the resistor from overheating.
- Power choke type LCVS & LCVT: Power choke types LCVS (for single-phase power installation) and LCVT (for three-phase power installation) increase the overvoltage protection of the inverter and increase the system's EMC.
- Power filters type FTV: Depending on the application boundaries, certain EMC levels must be achieved. The power filters are a component to improve EMC behavior in a machine installation.
Nguồn điện & Dải công suất
Power range (AGL402)
0.25 - 11 kW / three-phase 320 V... 530 V / 50 - 60 Hz (± 10%)
Power range (AGL202)
0.12 - 3 kW / single-phase 200 V... 240 V / 50 - 60 Hz (± 10%)
0.25 - 7.5 kW / three-phase 200 V ... 240 V / 50 - 60 Hz (± 10%)
0.25 - 11 kW / three-phase 320 V... 530 V / 50 - 60 Hz (± 10%)
Power range (AGL202)
0.12 - 3 kW / single-phase 200 V... 240 V / 50 - 60 Hz (± 10%)
0.25 - 7.5 kW / three-phase 200 V ... 240 V / 50 - 60 Hz (± 10%)
Hardware features
- Integrated Keypad
- Integrated brake chopper
- Integrated Safe Torque Off function
- DC link connection
- 6 digital inputs, 2 multifunction A/D inputs
- 1 digital output, 1 multifunction I/O
- 1 relay output, 1 multifunction A/D/Pulse output
- Signal supply outputs: +24 V DC, + 10 V DC
- Serial interfaces: RS-232, RS-485 including Modbus support
Software features
- Preset values for Bonfiglioli motors to decrease commissioning times
- Flexible assignment of digital inputs and outputs
- Energy Saving function
- Ready to use application macros
- Motor chopper function to increase braking power without brake resistors
- Power failure regulation
- Fault history
- Motor and inverter state memory
- Integrated PLC function with graphic development environment
Power range
• AGL202: 0.12 - 3 kW / single-phase 200 V... 240 V / 50 - 60 Hz (± 10%) 0.25 - 7.5 kW / three-phase 200 V ...240 V / 50 - 60 Hz (± 10%)
• AGL402: 0.25 - 11 kW / three-phase 320 V... 530 V / 50 - 60 Hz (± 10%)
• AGL402: 0.25 - 11 kW / three-phase 320 V... 530 V / 50 - 60 Hz (± 10%)
Mounting options
• Cabinet mounting for all sizes
• Optional feed-through mounting
• Optional DIN rail mounting frame
• Optional feed-through mounting
• Optional DIN rail mounting frame
Motors
- Motor compatibility
- Two types of motors:
- Asynchronous AC motors
- Permanent magnet synchronous (brushless) motors
Tùy chọn động cơ
Motor Control(open loop):
• Asynchronous AC motors
• Permanent magnet synchronous (brushless) motors
• Asynchronous AC motors
• Permanent magnet synchronous (brushless) motors
Types & Powers
Types & powers (AGL402)
| Type | kW (three-phase) |
|---|---|
| AGL402-02 1 | 0.25 |
| AGL402-03 1 | 0.37 |
| AGL402-05 1 | 0.55 |
Types & powers (AGL402)
| Type | kW (three-phase) |
|---|---|
| AGL402-07 1 | 0.75 |
| AGL402-09 1 | 1.1 |
| AGL402-11 1 | 1.5 |
| AGL402-13 1 | 2.2 |
| AGL402-15 2 | 3.0 |
| AGL402-18 2 | 4.0 |
| AGL402-19 2 | 5.5 |
| AGL402-21 2 | 7.5 |
| AGL402-19 3 | 5.5 |
| AGL402-21 3 | 7.5 |
| AGL402-22 3 | 9.2 |
| AGL402-23 3 | 11 |
Types & powers (AGL202)
| Type | kW (three-phase) |
|---|---|
| AGL202-02 1 | 0.25 |
| AGL202-03 1 | 0.37 |
| AGL202-05 1 | 0.55 |
| AGL202-07 1 | 0.75 |
| AGL202-09 1 | 1.1 |
| AGL202-11 1 | 1.5 |
| AGL202-13 1 | 2.2 |
| AGL202-15 2 | 3.0 |
| AGL202-18 2 | 4.0 |
| AGL202-19 3 | 5.5 |
| AGL202-21 3 | 7.5 |
Types & powers (AGL202)
| Type | kW (single-phase) |
|---|---|
| AGL202-02 1 | 0.12 |
| AGL202-03 1 | 0.18 |
| AGL202-05 1 | 0.25 |
| AGL202-07 1 | 0.37 |
| AGL202-09 1 | 0.55 |
| AGL202-11 1 | 0.75 |
| AGL202-13 1 | 1.1 |
| AGL202-15 2 | 1.5 |
| AGL202-18 2 | 2.2 |
| AGL202-19 3 | 3 |
| AGL202-21 3 | 3 |
Company
Products and solutions request